The calculation of the average number
Today Mirsovetov will tell you how to calculate the average number. Calculation of average number is made on forms No. 1-T "Data on number and a salary of workers" and…

Continue reading →

Cost accounting methods
Cost accounting at the enterprise is an important point in determining the efficiency of the enterprise. Accounting of production costs is carried out according to the methods approved by the…

Continue reading →

How to get a loan reprieve
According to statistics, every person at least once in his life took a loan from a Bank. And the situations are different and it is not always possible to make…

Continue reading →

The procedure for updating the software 1C: Accounting

Updating software products on the 1C platform is a process with a strictly defined procedure. The process of updating 1C software products on the platform 7.7 is simple, but contains a lot of stages, the omission of at least one of which will not allow to update correctly. However, the upgrade technology for 8.2 platforms is different.
Updating software products on the 1C platform is a process with a strictly defined procedure. You should make a copy of the information base before proceeding with the upgrade.
Saving a backup
A copy of the database can be made in two ways, and they are identical for both versions.
The first method is to copy the directory containing the database. To do this, open the window “Start 1C:Enterprise.”
1C update procedure
The path specified at the bottom of the window is the path to the directory where the information base is stored. In order to copy the folder with the database, you need to follow this path and copy the destination directory to the clipboard. In this example, the folder in which the database is stored is called Accounting. After that, you need to create a folder in which to store the backup copy of the program, and paste the backup copy into it. Once the copy is complete, you can proceed with the upgrade.
The second way is to upload the information base. Unloading of information base is made in the “Configurator”mode. In order to make a copy of the database, in the “Administration” menu, select “Upload database”, then specify the folder in which the copy will be stored, and click on “Save”.
1C update procedure
To view the enlarged picture, click on it
In order to make a backup copy of the database on the platform 7.7, you should use the “Save data”command. After the program reports that the data has been uploaded, you can start updating.
However, the technology updates for platforms, 7.7 and 8.2 differ significantly.
Updating of databases on the platform 7.7
In order to update the information base on the platform 7.7, it is necessary to prepare the appropriate files. As a rule, the update is delivered by the developer as an “UPDATE” file.EXE”. This file should be unzipped by double-clicking. After that, a number of files will appear in the update folder, as shown in the figure.
1C update procedure
To view the enlarged picture, click on it
All of these files will be required when upgrading, but the file is “UPDATE.”EXE” is not unzipped on 64-bit Windows 7 operating systems, so users of the specified system will have to use virtual machines or other computers to unzip the update file.
From the directory to which you extracted, you should copy all files except 1CV7.MD and UPDATE.EXE to the directory in which the information base is located.
1C update procedure
To view the enlarged picture, click on it
On the issue of the replacement of files to answer in the affirmative.
After that, follow these steps:
Create a new information base in the “Start 1C:Enterprise”window. To do this, click on the “Add” button, and in the “Path” line write the path to the directory with the unpacked update.
1C update procedure
To view the enlarged picture, click on it
After clicking on the “OK” button, a new line will appear in the “Start 1C:Enterprise” window with the name assigned by the user.
Run the created information base in the “Configurator”mode. When asked about the data storage format, select the following options:
Files.* DBF, *.CDX
+Current system installation.
In the Configurator, select open configuration from the Configuration menu. The message Configurator, you need to answer in the affirmative.
1C update procedure
To view the enlarged picture, click on it
Once the configuration is open, you need to click on the “Save”button.
1C update procedure
To view the enlarged picture, click on it
Next, all messages of the program must be answered in the affirmative. When the message “data Reorganization is finished” appears, you can close the program and start updating the database configuration directly.
To do this, the information base for which you want to install the update should be opened in the “Configurator”mode. On the Configuration menu, click Merge configurations.
1C update procedure
To view the enlarged picture, click on it
Then you need to select the file 1CV7.MD, located in the directory where the files that appeared after the update was unpacked are located. The path to this directory can also be found in paragraph 1 of the previous instructions.
1C update procedure
To view the enlarged picture, click on it
After that, you need to click on the “Open”button. Next, you must answer Yes to the configuration comparison notification, and then save the changes. All questions of the program should also be answered in the affirmative. When you see the message “Reorganizing data completed”, the base is finished updated. You can run it in “1C: Enterprise”mode. When you first start after the update, the program will display a message confirming the legality of receiving the update. It also needs to be answered in the affirmative.
The process of updating the software products of 1C on the platform 7.7 is simple, but contains a lot of stages, the omission of at least one of which will not allow to update correctly. The positive thing is that you can “jump” from update to update. That is, it is not necessary to put each update in order. It is enough to update to the most current update, which allows you to spend less time on the process of combining configurations.
Update of information bases on 8.2 platform
Unlike the configuration updates on the platform 7.7 when updating databases on the platform of the 8.2 it is impossible to “jump” over multiple updates. In other words, each update produced by 1C must be installed in order. However, there is a little trick, the use of which allows you to “jump” through several updates and install only the most current, but it will be discussed later.
Updates to the configurations on the platform 8.2 available in archives. Unpack archives in normal mode (right-click on the archive and select unpack). After unpacking the archive folder appears with five files.
In order to install the update template, you need to double-click the “setup” file.exe” and click “Next” until the update is installed. It is important that the template directory specified in the “configuration Setup” window (launched by double-clicking on the “setup” file.exe”), and the directory of configuration templates and updates, printed in the setting of the “Start 1C: Enterprise” dialog, were the same.

How to take a loan without references and guarantors
Despite the fact that taking out a loan today seems to be quite easy, in fact it is not so simple. Not all banks meet customers who need money in…

...

How to get the funded part of the pension
The term "funded pension" appeared in the pension legislation in 2001, while the law "On labor pensions in the Russian Federation"was adopted. It came into force on January 1 of…

...

How to make insurance cheaper
Today, insurance is an integral part of almost everyone's life. Life and health insurance, CASCO, CTP and other types of insurance take place, and each of them has its own…

...

Annual paid leave
Labour law determines that every employee is entitled to annual paid leave. When an employee is on vacation, he / she retains his / her place of work and position,…

...